BenQ-Siemens A58

DVD+R/DVD+RW/DVD+R DL Media (Only DVD+R/+RW Media) backup toDVD-ROM for much higher

compatibility with older DVD players and Game Consoles such asXBOX and PS2. Bitsetting is

done during the burning process when bitsetting DVD+R Media. Youcan also set/change your

DVD+RW Media's bitsetting/booktype, but the difference is thatyou can be bitset DVD+RW

Media even AFTER you have burned it.

Here are directions on how to Bitset or Change the BookType withDVD Decrypter on Plextor,

NEC, BenQ, LG, LITE-ON, Nu Tech/QSI and Ricoh Burners. There isno one best bitsetting

utility out there, if it works for your burner it works. You canalso use Nero to Change the

BookType or BitSet, check out our NERO Booktype Tutorial fordirections how. Note: Only Nero

SmartStart/Express version 6.3.1.6 or above support BitSet orChanging the BookType. If Nero

and DVD Decrypter does not Change the BookType or BitSet yourDVD+R to DVD-ROM please refer

to other Bitsetting Programs

DVD Decrypter Updated 6/6/2005: "DVD Decrypter 3.5.4.0 is thelast version you"ll ever see."

- Quote from Author LIGHTNING UK! about DVD Decrypter v3.5.4.0Utility for your Burner. This

program is no longer available as a result of copyrightinfringement.

Change Your DVD+R/DVD+RW/DVD+R DL Media to DVD-ROM

1. This tutorial assumes that you have a working ISO to burn

2. Put in a Blank DVD+R or DVD+RW Disk into your DVD Burner

3. Open up the DVD Decrypter

4. Select your dvd burner

5. Click on Mode > ISO > Write To see your current settings

6. Right click on the destination box which has your burnerselected then highlight and

select "Change Book Type"

7. Then select your respected burner's name which are on thetabs

8. The Change For is basically what media you want to change toDVD-ROM, (i.e For DVD+R

Media, For DVD+RW Media)

9. Now for New Setting: which you should select "DVD-ROM"

10. Click on the "Change" button, which will then show aSuccess pop up window

11. Click on "OK" to close the "Change Book Type" window

12. Start burning! By Clicking the write button (Picture ofHard drive to DVD)

Change Your DVD+R/DVD+RW/DVD+R DL Media to DVD-ROM using
NeroBurning ROM (Click For Nero

Express Tutorial)

1. This tutorial assumes that you have a working ISO to burn

2. Put in a Blank DVD+R or DVD+RW Disk into your DVD Burner

3. Open up the Nero SmartStart

4. Click "Cancel" button to close out the "New Compilation"window when it pops up

5. Click on "Recorder" > "Choose Recorder".

6. Select your DVD Burner

7. Then click on "Options", then on "Book Type Settings", setto "Automatic" and click

"OK"

8. Now whenever you use Nero to burn DVD+R Media, it willautomatically change the

BookType or BitSet it to DVD-ROM

Change Your DVD+R/DVD+RW/DVD+R DL Media to DVD-ROM using NeroExpress

1. This tutorial assumes that you have a working ISO to burn

2. Put in a Blank DVD+R or DVD+RW Disk into your DVD Burner

3. Open up the Nero SmartStart, then Nero Express

4. Click on "Copy Entire Disc"

5. Then click on "Options", then on "Book Type Settings", setto "Automatic" and click

"OK"

6. Now whenever you use Nero to burn DVD+R Media, it willautomatically change the

BookType or BitSet it to DVD-ROM

Bitsetting unfortunately has its restrictions when it comes towhich burner can bitset.

Burners that cannot be bitset are burners which are not Ricohengine based, which bitsetting

has based its technology around. For other burners that are notRicoh Burners you can try

the following bitsetting utilities found in the article/linksbelow:

1. A very nice Bitsetting article titled: Apply CompatibilityBitsettings using a

DVD+R/+RW PC Drive by DVDplusRW.org. You can also download thesoftware DVD BitSetter.

2. Or DVDInfoPro - Bitsetting capable for LG, BENQ, NU, NEC,BTC, Liteon, Micro

Advantage

3. Or DVD Decrypter - Bitsetting capable for Plextor, NEC,BenQ, LG, LITE-ON, Nu Tech/QSI

and Ricoh Burners

4. For NEC Burners (excluding ND-2500A) you can use a programscalled: WinBtype or DVD

Bitsetter. If you have an ND-2500A, you can use patchedfirmwares to enable its bitsetting,

which can be found here in the forum: ND-2500A BitsettingFirmware.

Article by Mike Ly for K-probe.com

Want to post this article or reference this article? You cantake our content Free of Charge

if you agree to leave everything intact included this message.

For bargain, high quality media go here: Shop4tech or

http://clickserve.cc-dt.com/link/click?lid=41000000009358653